With reliable SCSI and clustering support, this cost-effective storage solution can be easily incorporated into disk farms, ATM service centers, and imaging stations that require RAID protection at a lower cost per gigabyte.
With reliable SCSI and clustering support, this cost-effective
storage solution can be easily incorporated into disk farms, ATM
service centers, and imaging stations that require RAID protection
at a lower cost per gigabyte.
Two (2) SCSI-320 host channels; transfer rate up to 320MBps
per channel.
RoHS-compliant
Accommodates sixteen (16), 3Gbps, SATA-II (3Gbps) disk
drives.
ASIC400 architecture with hardware RAID6.
Market leading I/O performance
Sustained RAID5 Read/Write at 566/484 MB/sec.
Sustained RAID6 Read/Write at 566/426 MB/sec.
Up to 2GB DDR memory, ECC protected.
Hot-swappable, life expectancy-aware battery backup.
Online expansion, array roaming, and centralized management.
RAID
Multiple arrays each with an
independent RAID level
Dedicated, enclosure-specific, or
global hot spares.
Firmware-embedded utility via LCD
keypad or RS-232 serial port
VT-100 terminal emulation via
RS-232C
Telnet access via Ethernet port
10/100 BaseT Ethernet for
out-of-band management
Two (2) COM ports for local access
to firmware-embedded utility and UPS
connectivity
Java-based SANWatch software:
Graphical user interface
Local/remote management; in-band
or out-of-band via TCP/IP
Centralized management to
monitor and administer multiple RAID
units on one screen
Secure link over SSL
Configuration Client as an
independent software for event
notification
SNMP 2.0 MIBs with get and set
commands
Indicators
Onboard alarm
Module status LED indicators:
Module monitoring through I2C bus
Event notifications via Email, fax,
LAN broadcast, SNMP traps, MSN
messenger, and SMS short messages
Real-time monitoring via RAIDWatch
manager
Physical/Electrical
Interfaces
Four (4) VHDCI SCSI ports (for host
and cascading)
Two (2) COM ports for RS-232C
terminal and UPS support
One (1) 10/100BaseT Ethernet port
Power Supply Module
Two (2) redundant, hot-swappable power
supplies with PFC
Input
100VAC at 9A, 240 VAC at 4.5A with
PFC (auto-switching)
47
to 63Hz
Output
(Maximum output: 530 Watts)
+12.0V
32A max.
+ 5.0V
32A max.
+ 3.3V
30A max.
Cooling Module
Two (2) redundant, dual-fan cooling
modules
Maximum Air Flow
High speed: 90
DFM
Low speed: 70.7 CFM
Environmental
Specifications
Temperature:
Operating:
0° to 40°C (32° F to 104° F)
(without BBU)
Operating: 0° to 35°C (32° F to
95 ° F) (with BBU)
Non-operating: - 40° to 60°C
(-40° F to 140° F)
Relative
humidity:
Operating:
10% to 80% (non condensing)
Non-operating: 10 to 95% (non
condensing)
Altitude:
Operating:
sea level to 12,000 ft
Non-operating: sea level to
40,000 ft
Dimensions:
Chassis without handles: 445(W) x
130(H) x 486.7(D) mm (17.5 x 5.1 x 19.2
inches)
Chassis with handles: 482.6(W) x
131(H) x 534.6(D) mm (19 x 5.2 x 21
inches)
Package: 423(H) x 567(W) x 772(D) mm
(16.7 x 22.3 x 30.4 inches)
System weight (w/o
drives):
Net weight: 28.5kg (62.7 pounds)
Gross weight: 30.5kg (67.1)
There are no accessories for this
product at this time.
