NSS3U16SA-iS - 3U - iSCSI - Rackme Series

1-877-NEW-TECH

Rackmount Server - Rackme Series

iSCSI >> 3U >> NSS3U16SA-iS

NSS3U16SA-iS

The NSS3U16SA-iS leverages the existing TCP/IP network infrastructure by encapsulating data in iSCSI protocols. The NSS3U16SA-iS comes with 4 GbE data ports and all Infortrend’s standard RAID functions. The NSS3U16SA-iS delivers flexibility, ease of management, and configuration simplicity, while ensuring maximum security and protection for your precious data.

Ã¯

DESCRIPTION
SPECS
ACCESSORIES
IMAGES

The NSS3U16SA-iS leverages the existing TCP/IP network infrastructure by encapsulating data in iSCSI protocols. The NSS3U16SA-iS comes with 4 GbE data ports and all Infortrendâ€™s standard RAID functions. The NSS3U16SA-iS delivers flexibility, ease of management, and configuration simplicity, while ensuring maximum security and protection for your precious data.

iSCSI Gigabit (Gb) Ethernet to SATA-II (3Gbps) RAID subsystem
Four (4) GbE host ports plus one (1) Fast Ethernet port for management
EonPathâ„¢ multipathing driver
Hardware RAID6 XOR engine by dedicated ASIC400 chipsets
Access control over IP, IQN, and mutual CHAP
Support for iSCSI initiators compliant with IETF iSCSI standard (RFC 3720)

RAID Controller

Hardware RAID parity computing
Supports RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, and NRAID
Configurable stripe size and write policy per array
Multiple Global, Dedicated, & Enclosure-specific hot-spares
Intelligent Drive Handling:
- In degraded mode: skips irreparable blocks to continue rebuild
- In normal operation: data-block verification and repair
DDR Memory up to 2GB

Host Interface

Four (4) 1Gbps Ethernet
Jumbo Frame support
Concurrent I/O commands
Tagged command queuing up to 256

Drive Interface

Sixteen (16) 3.0Gbps SATA-II (3Gbps) , hot-swappable drive trays
Accommodates 1-inch pitch, 3.5-inch SATA-II (3Gbps) or SATA-I disk drives
S.M.A.R.T. and NCQ support
Automatic bad-sector reassignment
Dedicated bandwidth to each connected drive

System Components

Heavy duty 3U enclosure
One (1) RAID and I/O management controller module
One (1) 512MB DDR RAM DIMM module (default, supports up to 2GB in size)
Two (2), hot-swappable, redundant, 530W power supply units
Two (2), redundant, dual-speed cooling modules
Sixteen (16), hot-swappable drive trays
Two (2) forearm handles
Optional, Li-Ion, life expectancy-aware battery backup unit (BBU)

Management

COM1 serial port for local access to firmware-embedded utility
COM2 for UPS connection
GUI, Telnet, and SSH system monitoring via Ethernet
Java-based SANWatch software with Snapshot protection
Widest range of event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, and MSN
LCD keypad panel to all configuration options
Event log in reserved space; Administrator's activity log
Module status LED indicators:
Two (2) per drive tray
Seven (7) per controller module
- One (1) per power supply unit
- One (1) per BBU module
- Two (2) per cooling module
Module failure alert through I ² C bus

Interfaces

Four (4) RJ-45 ports for Cat5e Ethernet networks
One (1) Fast Ethernet management port
Two (2) serial COM port (38400, n, 8, 1)

Power Supply Module

Two (2) redundant hot-swappable power supplies with PFC

Input	100VAC at 9A, 240VAC at 4.5A 530W with PFC (auto-switching)
Input	47 to 63Hz
Output	(Maximum output: 530 Watts)
	+12.0V	30A max.
	+ 5.0V	32A max.
	+ 3.3V	30A max.

Cooling Module

Two (2) redundant dual-fan cooling modules

Maximum air flow	high speed: 90CFM low speed: 70CFM

Environmental Specifications

Operating temperature	0Â° to 40Â°C (35Â°C if battery is applied)
Non-operating temperature	- 40Â° to 60Â°C
Relative humidity	5 to 95%, non-condensing
Operating altitude	Operating: 0 to 12,000 ft Non-operating: 0 ot 40,000 ft

Dimensions:

Chassis without handles: 445(W) x 130(H) x 488.2(D) mm (17.5 x 5.1 x 19.2 inches)
Chassis with handles: 482.6(W) x 131(H) x 504.3(D) mm (19 x 5.2 x 19.9 inches)
Package: 423(H) x 567(W) x 772(D) mm (16.7 x 22.3 x 30.4 inches)

System weight:

Net weight: 28.5Kg
Gross weight: 32kg (without drives)

There are no accessories for this product at this time.