Rackmount Server - Rackme Series
SAN
>>
3U
>> NSS3U16SS
NSS3U16SS
With 4 or 2 SAS wide host ports, each with a 1200MBps bandwidth, the NSS3U16SS aims to succeed SCSI-based arrays in DAS applications. Capacity can be more readily expanded using the SAS wide expansion links by the addition of the NSS3U16SS JBOD. Within the array, reliable SAS drives can be applied for mission-critical operations and the high capacity SATA drives for near-line backup or archival uses.
ï
With 4 or 2 SAS wide host ports, each with a 1200MBps bandwidth,
the NSS3U16SS aims to succeed SCSI-based arrays in DAS applications.
Capacity can be more readily expanded using the SAS wide expansion
links by the addition of the S16S JBOD. Within the array, reliable
SAS drives can be applied for mission-critical operations and the
high capacity SATA drives for near-line backup or archival uses.
SAS to SAS/SATA-II RAID subsystem
Redundant or single RAID controller
EonPath® multi-pathing, load-balancing software
4 or 2 SAS 4x wide host ports
Hardware RAID6 engine by dedicated ASIC400 chipsets
Superior performance w/ uncomplicated connectivity
16 SAS or SATA-II (3Gbps) disk drives
Expansion to 80TB via a 4x wide expansion port
RAID
Hardware RAID5 & RAID6
Supports RAID 0, 1 (0+1),
3, 5, 6, 10, 30, 50, 60, NRAID
RAID Migration
Configurable stripe size
and write policy per array
Multiple Global, Dedicated,
& Enclosure-specific hot-spares
Intelligent Drive Handling:
In degraded mode: skips irreparable
blocks to continue rebuild
In normal operation: data-block
verification and repair
Host Interface
4 (S16S-R1030) or 2 (S16S-G1030) SAS wide
ports
12Gbps bandwidth (half duplex) per port
Concurrent I/O commands
Tagged command queuing up to 1024
Max. command queue up to 1024
Fault-tolerant host links with the EonPath
multi-pathing software
Included cables:
S16S-R1030 – 2x SFF-8088-to-SFF-8470
120cm cables
Drive Interface
16 3.0Gbps SAS/SATA-II, hot-swappable drive
trays
Accommodates 1-inch pitch, 3.5-inch SAS or
SATA-II (3Gbps) disk drives
S.M.A.R.T. and NCQ support
Automatic bad-sector reassignment
Dedicated bandwidth to each connected drive
In-band enclosure service through the
expansion links from expansion enclosures
Path redundancy to disk drives via edge
expanders and expanders on JBOD controllers
through separate SAS domains
MUX kits with port selectors for
dual-controller access to SATA drives
System Components
High density, smartly managed 3U enclosure
Dual redundant or single RAID controller
One DIMM module with capacities from 512MB
to 2GB
Redundant, hot-swappable 530W power supply
units
Redundant, dual-speed cooling modules
Sixteen (16), hot-swappable drive trays
Two (2) forearm handles
Li-Ion battery backup unit (BBU), life
expectancy and charge level aware
Management
COM1 serial port for local access to
firmware-embedded utility
COM2 for UPS connection
Automated cache flush and caching mode
operation per enclosure status
GUI, Telnet, and SSH system monitoring via
Ethernet
Java-based SANWatch software with Snapshot
protection
Firmware-embedded manager via RS-232C (audio
jack) that is platform independent
Widest range of event notification methods
including email, LAN broadcast, fax, SNMP traps,
SMS, and MSN
LCD keypad panel for monitoring and access
to all configuration options
Variable logical drive options per DIMM size
Module status LED indicators:
Two (2) per drive tray
Seven (7) per controller module
One (1) per power supply unit
One (1) per BBU module
Two (2) per cooling module
Presence detection & thermal sensors via I2 C
bus
Power Supply Module
Redundant hot-swappable power supplies with PFC
Input
100VAC at
9A, 240VAC at 4.5A with PFC (auto-switching)
47 to 63Hz
Output
(Maximum
output: 530 Watts)
+12.0V
32A max.
+ 5.0V
32A max.
+3.3V
30A max.
Cooling Module
Redundant dual-thermal-fan cooling modules
Maximum air
flow
90CFM (high
speed);
Environmental Specifications
Operating temperature:
5º to
40ºC (35°C if battery is applied)
Non-operating
temperature:
- 40º to 60ºC
Relative humidity:
5 to 95%,
non-condensing
Operating altitude:
Operating: 0 to
12,000 ft
Dimensions
Package: 423(H) x 567(W) x
772(D) mm (16.7 x 22.3 x 30.4 inches)
System Weight
Net weight: 28.5kg (62.7 pounds)
Gross weight: 30.5kg (67.1 pounds)
There are no accessories for this
product at this time.
