Rackmount Server - Rackme Series
SAN
>>
3U
>> NSS3U16SS-FC
NSS3U16SS-FC
The NSS3U16SS-FC combines extensive Fibre Channel connectivity with the latest SAS-interface disk drives. With a compatible interface, both the high-performance SAS and cost-effective SATA-II disk drives can apply in the same array. With the SAS multi-lane expansion ports, arrays can be expanded with up to 64 more HDD.
ï
The NSS3U16SS-FC combines extensive Fibre Channel connectivity
with the latest SAS-interface disk drives. With a compatible
interface, both the high-performance SAS and cost-effective SATA-II
disk drives can apply in the same array. With the SAS multi-lane
expansion ports, arrays can be expanded with up to 64 more HDD.
Dual-active or single controller
4G FC to SAS or SATA-II (3Gbps) disk drives
Eight (8 - R1430) or four (4-G1430) 4G FC host ports
Hardware RAID5 and RAID6 engine by dedicated ASIC400
chipsets
EonPathâ„¢ multipathing sotware
SANWatch® storage management software
RAID Controller
Hardware RAID
parity computing
Hardware RAID5 &
RAID6 parity computation
Supports RAID 0, 1
(0+1) , 3, 5, 6, 10, 30, 50, 60, and
NRAID
RAID Migration
Configurable stripe
size and write policy per array
Multiple Global,
Dedicated, & Enclosure-specific
hot-spares
Intelligent Drive
Handling:
In degraded mode: skips
irreparable blocks to continue
rebuild
In normal operation: data-block
verification and repair
Host Interface
Eight (8-R1430) or
four (4-G1430) 4G FC
4Gb/s via
short-/long-wavelength LC-type SFP
Concurrent I/O
commands
Tagged command
queuing up to 1024 Max
command queue up to
1024
Fault-tolerant host
links via onboard bypass
Drive Interface
Sixteen (16) 3.0Gbps SAS,
hot-swappable drive trays
Accommodates 1-inch pitch, 3.5-inch
SAS or SATA-II (3Gbps) disk drives
S.M.A.R.T. and NCQ support
Automatic bad-sector reassignment
Dedicated bandwidth to each
connected drive
MUX kits with port selectors for
dual-controller access to SATA drives
System Components
Heavy duty 3U enclosure
Dual- (R1430) or Single (G1430) RAID
and I/O management controller module
Fault-tolerant modules interfaced
through a common backplane
High availability SAS domains to
hard drives via expanders and port
selectors
One (1) 512MB DDR DIMM module
(default, supports up to 2GB in size)
Redundant, hot-swappable 530W power
supply units
Redundant, dual-speed cooling
modules
Sixteen (16), hot-swappable drive
trays
Two (2) forearm handles
Li-Ion, life expectancy-aware
battery backup unit (BBU)
Management
COM1 serial port for local access to
firmware-embedded utility
COM2 for UPS connection
GUI, Telnet, and SSH system
monitoring via Ethernet
Java-based SANWatch software with
snapshot protection
Firmware-embedded manager via
RS-232C (audio jack) that is platform
independent
Widest range of event notification
methods including email, LAN broadcast,
fax, SNMP traps, SMS, and MSN
LCD keypad panel to all
configuration options
Event log in reserved space;
Administrator's activity log
Variable logical drive options per
DIMM size
Module status LED indicators:
Two (2) per drive tray
Seven (7) per controller module
One (1) per power supply unit
One (1) per BBU module
Two (2) per cooling module
Presence detect & thermal
sensors via I2 C bus
Physical/Electrical
Interfaces
Four (4) SFP host ports for 4Gb/s
DAS or SAN connections
One (1) Fast Ethernet management
port
Two (2) serial COM port (38400, n,
8, 1)
Power Supply Module
Redundant hot-swappable power supplies with
PFC
Input
100VAC at 9A, 240VAC
at 4.5A with PFC (auto-switching)
47 to 63Hz
Output
(Maximum output: 530
Watts)
+12.0V
32A max.
+ 5.0V
32A max.
+ 3.3V
30A max
Cooling Module
Redundant dual-thermal-fan cooling modules
Maximum air flow
High speed: 90CFM
Low speed: 70CFM
Environmental Specifications
Operating
temperature:
5° to 40° C (35° C
if battery is applied)
Non-operating temperature:
- 40° to 60° C
Relative humidity:
5 to 95%, non-condensing
Operating altitude:
Operating: 0 to 10,000 ft
Dimensions
Without protrusions: 131H x 446.2W x
500D mm
With protrusions: 131H x 485W x 532D
mm
Package dimensions: 476H x 592W x
695D mm
System weight
Net weight: 34kg
Gross weight: 32kg (without drives)
There are no accessories for this
product at this time.