12-bay SCSI-to-SCSI single controller RAID system with Ultra SCSI-320 host I/F providing full-featured RAID functionality. This model is built around ASIC266 RAID engine and is ideal for providing dedicated performance in DAS applications. The series also features the 64-bit LBA support to eliminate limitations on array sizes.
12-bay SCSI-to-SCSI single controller RAID system with Ultra
SCSI-320 host I/F providing full-featured RAID functionality. This
model is built around ASIC266 RAID engine and is ideal for providing
dedicated performance in DAS applications. The series also features
the 64-bit LBA support to eliminate limitations on array sizes.
SCSI to SCSI single controller RAID subsystem with SCSI-320
host I/F providing full-featured RAID functionality
Hardware XOR engine by dedicated ASIC266 chipsets
Dual-speed fans to reduce system noise and power consumption
Redundant hot-swappable components
DDR Memory up to 2GB
RAID
Multiple arrays configurable with dedicated or global
hot spares
Centralized management to monitor and administer
multiple RAID units on one screen
Configuration client for real-time event notification
over Email, Fax, LAN broadcast, SNMP Traps, MSN messenger,
ICQ, SMS short messages, and the configuration utility
screen
SNMP agent support:
SNMP trap event notification with plain-text event
message (no MIB file required)
SNMP V2.0 MIB file support with get-and-set commands
Indicators
Onboard alarm is triggered when one of the following modules
fails:
RAID controller module surpass the self-monitoring
thresholds
Cooling module
PSU
BBU (if installed)
Hard drive
Module-status LED indicators:
Two (2) per drive tray
One (1) per cooling module
One (1) per PSU
Three (3) per LCD panel
Four (4) per RAID controller module
Two (2) per Ethernet port
One (1) per BBU (if installed)
Module failure alert through I2C bus
IOSmart
IOSmart allows for the flexible configuration of logical
drives, logical volumes and logical partitions and ensures
instant RAID availability via background logical drive
initialization. The firmware's embedded intelligent algorithms,
such as Adaptive Write Policy and Guaranteed Latency I/O,
improve the performance of sequential write applications and
ensure the fast and continuous flow of data.
DrvSmart
The DrvSmart utility provides an easy way to store data while
keeping it safe. One of the main DrvSmart functions, Media Scan,
retrieves data from degraded or damaged hard drives and handles
low quality drives in both the degraded mode and during the
rebuild process. Other DrvSmart features include disk cloning,
drive roaming, SMART, transparent resetting of non-responsive
hard drives, and RAID parity update tracking and recovery.
Interfaces
Dual VHDCI, 0.8mm LVDS SCSI host channels
Two (2) audio jack RS-232C serial port (38400, n, 8, 1)
One (1) 10/100M Ethernet port
Power Supply Module
Two (2) redundant hot-swappable power supplies with PFC
Input:
100VAC at 6A, 240VAC at 3A with PFC
(auto-switching)
47 ~ 63Hz
Output:
(Maximum output: 350 Watts)
+12.0V
25A max.
+ 5.0V
25A max.
+ 3.3V
20A max.
Cooling Module
Three (3) redundant single-fan cooling modules
Maximum air flow per module:
High speed: 31.8 CFM
Low speed: 20.1 CFM
Environmental Specifications
Operating temperature:
0° to 40°C
Non-operating temperature:
- 40º to 60ºC
Relative humidity:
5 ~ 95%, non-condensing
Operating altitude:
Operating: 0 ~ 12,000 ft
Non-operating: 0 ~ 40,000 ft
Dimensions
2U enclosure: 88H x 446W x 490D mm
2U enclosure with protrusions: 88H x 482W x 505D mm
Package: 344H x 600W x 670D mm
System Weight
Net weight: 23.5kg
Gross weight: 25kg
There are no accessories for this product at this time.
