NTS Liquid Cooling Built in the USA
Direct Liquid Cooling for Dense AI Racks
Cold plates, manifolds, QDs, and CDU programs sized to HGX and high-TDP nodes—facility worksheets and Fremont soak before freight.
Liquid Cooling
DLC programs with CDU and rack accountability
NTS liquid cooling covers CPU/GPU/DIMM cold plates, horizontal CDMs, 100 kW and 250 kW class CDUs, and hose kits—coordinated with Supermicro, CoolIT, Motivair, and HPE ecosystems when programs require them.
Choose DLC when air cannot hold clocks on dense HGX or high-kW racks without excessive fan power. Hybrid air/liquid rows are supported when elevations and coolant domains are documented.
Procurement spans SEWP V, ITES-4H, and SLED vehicles; thermal soak and leak/flow evidence ship with Fremont integration when L11/L12 is on the same vehicle.
NTS documents rack elevation, PDU draw, thermal headroom, and driver baselines on every RFQ so facility teams are not discovering constraints at install.
Related storage, networking, and software lines can ride the same quote when your vehicle and SOW allow—keeping multi-vendor programs under one accountable integrator.
Cooling paths
DLC racks, CDUs, and related platforms
Continue into liquid-cooling racks, GPU DLC SKUs, B200 design guidance, and Fremont staging.
- Manifold & QD design
- Row elevations
- Contract quoting
- Redundancy options
- Flow worksheets
- Facility inputs
- B200 / B300 DLC
- Thermal soak
- Fabric options
- Design inputs
- Failure modes
- Acceptance tests
- Thermal soak
- Serial manifests
- Nationwide rack-stack
- Air vs DLC
- TCO drivers
- CLIN quotes
- Multi-vehicle
- Hardware + cooling
- Integration CLINs
- CDU sizing
- Fabric map
- SOW scope
NTS catalog
Available Liquid Cooling configurations
Select a platform below to configure, request a quote, or add to your procurement package.
- Configure & quote
- CPU / memory / storage specs
- Contract-ready procurement
Configure & quote
CPU / memory / storage specs
Contract-ready procurement
NTS Elite Fusion 6U Liquid-Cooled GPU Server for AI & HPC Workloads
- 6U 10-node front access server system
- Dual Intel® Xeon® 6900-Series Processors per node
- 2 x E3.S Gen5 NVMe hot-swap bays per node
- 10 x 3200W 80 PLUS Titanium redundant power supplies
- 3 x LP PCIe Gen5 x16 slots per node
- 12-Channel DDR5 RDIMM / MRDIMM, 24 x DIMMs per node
NTS Elite Fusion 6U Liquid-Cooled AI GPU Server | High-Density AMD EPYC
- 6U 10-node front access server system
- Dual AMD EPYC™ 9005/9004 Series Processors per node
- 2 x E3.S Gen5 NVMe hot-swap bays per node
- 10 x 3200W 80 PLUS Titanium redundant power supplies
- 2 x LP PCIe Gen5 x16 slots per node
- 12-Channel DDR5 RDIMM, 24 x DIMMs per node
NTS Elite Command 2U High‑Density with 8 Drives, 4 GPU Slots and Liquid Cooling
- Direct liquid cooling solution
- Dual AMD EPYC™ 9005/9004 Series Processors per node
- 12-Channel DDR5 RDIMM, 24 x DIMMs per node
- 8 x 2.5" Gen5 NVMe/SATA/SAS-4 hot-swap bays
- Dual 3600W 80 PLUS Titanium redundant power supply
NTS Elite APEX 2U Liquid Server Platform
Dual AMD EPYC™ 9005/9004 Series Processors per node
Direct liquid cooling solution
12-Channel DDR5 RDIMM, 24 x DIMMs per node
8 x 2.5" Gen4 NVMe/SATA/SAS hot-swap bays
4 x M.2 slots with PCIe Gen4 x4 interface
Dual 3000W 80 PLUS Titanium redundant power supply
Specifications shown are reference configurations—final BOM validated by NTS architects for your workload, facility power, and security baseline.
Frequently asked questions
High-TDP GPU nodes, dense racks, and 24/7 training where air cannot hold clocks without excessive fan power.
- Facility CDU required
- Weight and leak response plans
Yes with clear rack elevation and coolant distribution design—NTS documents both thermal domains.
- Do not mix casually
- Worksheets provided
Yes—attachments include coolant flow, power, and acceptance criteria contracting officers expect.
- Longer lead times possible
- Milestones at quote
FRU procedures include coolant safety steps; NTS trains to the SOW and provides serial-tracked parts.
- Support playbooks
- On-site options
